# ROCm support

**URL:** <https://gromacs.bioexcel.eu/t/rocm-support/11734>\
**Category:** User discussions\
**Tags:** mdrun\
**Created:** [March 13, 2025, 4:27am UTC](https://gromacs.bioexcel.eu/t/rocm-support/11734 "2025-03-13T04:27:16Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![archturing](https://avatars.discourse-cdn.com/v4/letter/a/f07891/32.png) [@archturing](https://gromacs.bioexcel.eu/u/archturing)\
**Post date:** [March 13, 2025, 4:27am UTC](https://gromacs.bioexcel.eu/t/rocm-support/11734/1 "2025-03-13T04:27:16Z")

</div>

GROMACS version: 2025.0  
GROMACS modification: No

Hi,

I am a developer at AMD where I work on the HIP compiler backend. I am working with a gromacs user on a simulation project. I observed that gromacs is incompatible with gfx1031 (Radeon 6700XT). Is it not supported?

Thanks,  
Anshil Gandhi

---

<div class="post-metadata">

**Author:** ![pbauer](https://dub1.discourse-cdn.com/flex017/user_avatar/gromacs.bioexcel.eu/pbauer/32/13_2.png) [@pbauer](https://gromacs.bioexcel.eu/u/pbauer)\
**Post date:** [March 13, 2025, 7:03am UTC](https://gromacs.bioexcel.eu/t/rocm-support/11734/2 "2025-03-13T07:03:42Z")

</div>

Hello,

I’m the person at AMD responsible for GROMACS support (paubauer), please contact me through internal channels.

/Paul

---

<div class="post-metadata">

**Author:** ![pbauer](https://dub1.discourse-cdn.com/flex017/user_avatar/gromacs.bioexcel.eu/pbauer/32/13_2.png) [@pbauer](https://gromacs.bioexcel.eu/u/pbauer)\
**Post date:** [March 13, 2025, 8:55pm UTC](https://gromacs.bioexcel.eu/t/rocm-support/11734/3 "2025-03-13T20:55:40Z")

</div>

For the record, the issue was due to not including the target architecture at configuration time.  
Adding -DGMX\_HIP\_TARGET\_ARCH=gfx1031 to the cmake line is the fix for this.

/Paul